SecoGear IEC - Metal Enclosed Switchgear

“Images of GE Products shown at this page are Copyright Protected and Property of General Electric Company”

SecoGear metal clad switchgear is designed and manufactured with advanced technology and has been comprehensively and successfully type tested by KEMA.

SecoGear switchgear is typically used in power plants, substations and suitable to provide control and protection for transformers, capacitors and motors. The rated voltage of SecoGear is 12kV - 17.5kV and rated current ranges from 630A to 4000A (4000A has force cooling).

 

All SecoGear with switching device are equipped with SecoVac vacuum circuit breaker with corresponding specifications. SecoGear switchgear is designed for indoor applications, and is particularly suitable for applications in industry, mining, oil and gas and infrastructure. SecoGear is designed, assembled and tested to meet or exceed applicable IEC and GB/DL standards.

Features and benefits

  • Indoor metal-enclosed (According to IEC 62271-200, loss of service continuity category (LSC) 2B and partition class is PM –metallic partition) switchgear designed for the MV section of HV/MV and MV/MV substation.
  • Air insulated switchgear.
  • Safe and Reliable switchgear for universal indoor applications.
  • Equipped with the latest design embedded pole SecoVac vacuum circuit breaker.
  • Cable compartments with ample space for ease of power cable connection.
  • Fully arc-proof unit up to 50kA for 1 second AFLR.
  • Tested in accordance with the IEC international standards.
  • Tested to UBC zone 4 IBC 2012 intensity 9 for Seismic.
  • Front panel features easy operation and low maintenance.
  • Complete interlocking system to prevent incorrect operation and to improve safety.
  • Full Front Access for back to wall installation as optional.
  • Marine Applications available.

Arc-Proof Tested

 

The metal clad design, sturdy door hinges and lock system, enables SecoGear to successfully pass 40kA/1s internal arcing test in accordance with IEC 62271-200 in all its three primary compartments. SecoGear metal clad switchgear is designed to meet protection degree of IP40X as per IEC 60529. The grounded metal enclosure protects operators from live and moving parts inside the switchgear. The enclosure is sealed to eliminate penetration of external objects, which may cause short-circuit of the system.